Hyd. Cable Puller System (WJ-HCP55T)

The HCP system is designed to pull in or pay out 1-5/8 inch diameter wire rope at tensions up to 55ton. It is also designed to be rugged and capable of withstanding the force and conditions found in salvage scenarios.

Patent

Hydraulic Cable Puller For Salvage(Application No. 20-2010-0005153)
- Localization development appliedto ROKN ATS-II (H.7038)
Carpenter Stopper For Wire Rope(Application No. 20-2010-0007823)
- Localization development applied to ROKN ATS-II (H.7038)

Overview

The 55 ton hydraulic Cable Puller is a liner winch that is designed to pull in or pay out 1 5/8-inch wire rope. The puller consists of two wire rope grips that can grip or release the wire rope by opening and closing the grip jaws with small hydraulic cylinders. The fixed grip is stationary on the puller frame while the hauling grip is mounted on a moving cross head. The cross head moves back and forth in the direction of the wire rope by the action of large hydraulic cylinders. Movement of the cross head is coordinated with the gripping and releasing of the wire rope pull in or pay out the wire rope.

Specification

  • Model No. : WJ-HCP-55T
  • Capacity : SWL 55 tons
  • Wire Rope : 1-5/8 inch
  • Pulling Speed : 2m/min
  • Hyd. Pressure : 210 bar

Benefits

  • Fewer are needed to operate the puller than purchase systems.
  • The puller controls can be located wherever advantageous.
  • Continuous line pull gives positive control of the pulling operation. No holding stoppers are required for the purchase wires when heaving is stopped because the ground leg is held by grips integral to the pullers. Pulling can be resumed immediately.
  • The Pullers are portable.
  • No loss of pulling force caused by the sheaves with the loss of efficiency.
  • The heaving operation can be proceeding continuously without stopping to fleet out the purchases.

Components

1. HPU(Hydraulic Power Unit)

1.ELECTRIC DRIVEN HPU
  • Motor : 90kw, 1800 rpm
  • Pump Type : Plunger
  • Flow : 100 Liter
  • Weight : 2.0 Tons
  • Max. Operating Pressure : 210bar
2.DISEL DRIVEN HPU
  • Engine : 120HP, 2000 RPM
  • Fuel : Diesel
  • Fan Radiator Type
  • Pump Type : Plunger
  • Flow : 100 Liter
  • Weight : 2.0 Tons

2. Control Stand

Hydraulic
  • Press. Gauge Range : 400 bar
  • Operating Type : Lever
  • Weight : 0.4 Tons
Electric
  • Display : Pressure, Load
  • Operating Type : Joystick
  • Weight : 20 kg

3. Load Cell

Hydraulic
  • Capacity : 55 ton(Max.80ton)
  • Size(LWH) : 685x440x375
  • PerformanceTest : Tensile Test
Electric
  • Capacity : 55 ton(Max.80ton)
  • Size(LWH) : 510x160x106
  • PerformanceTest : Tensile Test

4. Hose Reel

  • Hose Range : HCP↔V/V, Block ↔ HPU
  • Hose Length : ½” x 15m, 1” x 15m
  • Size(LxWxH) : 850x700x860(For E) 850x1000x860(For D)
  • Operating :By Manual

Record

ROKN, ATS-II (DSME)